GTEC Flex track is designed to allow easy construction of curved partitions. It is a galvanised 0.70mm metal angle used in place of standard metal GTEC U Track. It is supplied pre-cut to allow a minimum radius of 600mm to be achieved.
Used as a track on the floor and ceiling to created aesthetically pleasing curved wall. Used as part of either a single or twin framing system. It is recommended for systems of this nature that GTEC Contour Board be used and that boards are installed horizontally.
Curves of a minimum 600mm radius can be achieved
Pre-cut at 50mm centres* Manufactrured to BS EN 14195