British Gypsum Thistle Bond-It

Product Code: WB1BIBG

Bonding agent for smooth and/or low suction backgrounds providing an adequate key.

Description

Bonding agent for smooth and/or low suction backgrounds. It provides a chemical key as well as creating a mechanical key with the included aggregate particles. Applied in one coat by roller or brush onto the background, this can then be plastered over when dry. Green in colour to aid identification of treated areas. Typical coverage needed for 100m² is approx. 22 litres undiluted.

  • For use on smooth backgrounds, e.g. concrete with Thistle BondingCoat, or for re-skimming
  • No dilution – so no scope for errors, no time spent mixing, no confusion on site
  • Always used in one coat only – so no decisions to take about background porosity
  • Contains fine aggregates for better mechanical, as well as chemical adhesion
  • Green in colour – so it’s easy to see where it’s been applied
  • Plastered when dry – so no difficult timing to get right
  • The only product recommended for use with Thistle BondingCoat plaster

Product Data Sheet

Download