Description
Used to fix a wide variety of GTEC Boards to metal studs. Please note the below when using GTEC Performance Self Tapping Screws: Screws to be located a minimum of 10mm from bound edges and 13mm from cut edges, Screw location to be a minimum of 3mm from the edge of the metal stud, Screw depth into the metal stud must be a minimum of 10mm
- For use with thin gauge metal studwork (under 0.7mm thick)
- Used to attached Siniat Performance boards such as GTEC LaDura, Megadeco and Universal boards to metal studs
- Fine threaded screw
- Phillips head
- Carbon steel screws with Zinc Coating
- Manufactrured to BS EN 14566