Laying a strong Foundation with Ravatherm XPS X insulation

11 November 2020

There are many insulation materials on the market but not all of them are suitable for every part of the building. For the floor in particular, where a vital function is to support the loads placed on it during the life of the building, the material’s compressive strength and its water absorption characteristics are the most important.

With some types of building, loadings are easy to predict and unlikely to increase with time. However, some others, especially industrial buildings, can see the required floor strength increase due to a change of occupancy or developments in production.

Any material will compress when a load is placed on it. Therefore, when selecting insulation, we need to take into account compression of the floor and whether it is caused by static point loads (such as a rack of shelves in a warehouse) or dynamic loads (such as a forklift or truck entering the warehouse).

Extruded Polystyrene (XPS) insulation boards can offer excellent compressive strength with products available to cater for a wide variety of load types. Due to the board’s closed-cell structure, they also offer excellent thermal performance compared to open-cell EPS, which is vulnerable to frost.

The residential market will typically require boards capable of sustaining loads of up to 200 kPa. Ravatherm XPS X 200SB is equipped with a butt edge finish, these boards can be installed below the slab or below the floor screed, as well as in beam and block floors.

300 kPa boards are probably the most versatile, suitable for most residential and commercial buildings. Because they are suited for many applications, manufacturers offer 300 kPa boards in a range of thicknesses to meet the desired performance.

For example, Ravago Building Solutions offers Ravatherm XPS X 300 SB in thicknesses from 30mm to 125mm, with a BRE Green Guide rating of ‘A’.

When constructing a car park deck or cold store, it is necessary to consider products with a compressive strength of 500 kPa. Ravatherm XPS X 500SL has the ability to manage dynamic loads caused by constantly flowing traffic, these boards are manufactured with a ship-lap edge finish which means they will have an overlap and minimise any gaps.

Exceptionally heavy loads like those caused by large aircraft in hangars will require a heavy-duty product. A board with compressive strength of 700 kPa and dynamic load strength of 250 kPa, like Ravatherm XPS X 700 SL, can withstand as much as 25 To/m2 of continuous load with just 2% of thickness reduction in 50 years.

For more information on the full range of Ravatherm XPS X insulation products please visit Ravago Building Solutions UK website.

https://ravagobuildingsolutions.com/uk/en/